POWER SEATING SYSTEM COMBINATIONS

Many power seating systems can be combined on the same chair.  Below are a few examples of the many combinations available. Some power seating systems cannot be combined with others for various reasons. Contact the factory to discuss your needs and we will be more then happy to review the features and options available.


Power Seat Elevate (PSE2) & Power Tilt (PTS)

PSE2 in up position PSE2 in up and tilt position
Power Seat animated gif
BOUNDER Plus H-Frame with:

For users under 250 lb. A 21” seat height is usually required.



 

Power Seat Elevate (PSE2), Power Tilt (PTS)
& Power Recline (PRS)

Elevate, Tilt and Recline
BOUNDER Plus H-Frame with:

For users under 250 lb. A 21” seat height is required.




Power Tilt (PTS) & Recaro®

30° of tilt & semi-recline built into Recaro® ES seat

Recaro@ ES with 30 degree  power tilt Recaro and tilt
Bounder with leather Recaro® seat, tilt and recline animation
BOUNDER Plus Conventional Frame with:
Power Tilt, Recaro® ES Seat &
Dual Independent Power Elevating Legrests


 

Power Seat Elevate (PSE2), Reverse Power Tilt (RPTS), Elevating Legrests (DIPLR) & Recaro®

Animated gif of seat elevate, reverse tilt and power legrests

BOUNDER Plus H-Frame with: With this combination the seat height to the top center of the Recaro® seat cushion is 26".
BOUNDER Plus with Recaro, PSE2, RPTS, DIPLR


 

Power Recline (PRS), Reverse Power Tilt (RPTS) & Power Elevating Legrests (DIPLR)

Reverse tilt, recline & power legrest animation
BOUNDER Plus H-Frame with:

RPTS DIPLR Lockout required. This prevents the legrests from elevating when the seat is tilted forward.



 

Power Front Load (PFLS), Power Seat Elevate (PSE2) and Power Tilt (PTS)

Front Load with custom center mount adjustable footboard Front Load with optional seat elevator and tilt
Power Front Load System extend out and down
BOUNDER Plus H-Frame with:

Power Latitude Seating System can be combined with Power Seat Elevator and Power Tilt System. Some limitations apply:  The user cannot operate the elevate or tilt options when the seat is extended forward and cannot extend the seat forward if elevated or tilted. The user cannot drive the chair when the seat is extended forward.

22” Seat-to-Floor Height is required
Long base required



 

Power Standing (STAND) & Power Tilt (PTS)

Animated gif of tilt and stand
BOUNDER Plus H-Frame with:

21” seat height required



 

Power Standing (STAND) & Power Recline

Power Stand and Recline in standing position Power Stand and Recline in recline position
BOUNDER Plus H-Frame with:

21” seat height required



No pictures or graphics on this website may be used without permission of 21st Century Scientific, Inc.